Middlesex County, Ontario | Change Temperature Celsius or Fahrenheit Unit Display
Change temperature unit display mode using controls and LCD window on the right side console for ClimaTrak (ATC) system. Refer to the attached image of ATC Control Unit.pdf
1. Turn blower to off
2. Turn temperature control to max. cool
3. Turn mode control to foot (heat) position
4. Then by pressing Auto Control Blower button (E) and Economy Mode (snowflake) button (F) within 0.1 seconds of each other (essentially same time).
Temperature unit display mode will be visually indicated by all of the LCD symbols being turned off except for the letters DIA where ambient air temperature would normally be displayed. DIA will be displayed for 10 seconds after entering change mode.
Change temperature units, either degrees C or degrees F, which can be toggled by pressing Auto Blower (E) and Auto Mode Control (G) buttons at same time. The active unit will then be utilized upon exiting change mode.
Change mode is exited with the same procedure as when entered, by first turning the blower to off, the temperature to max. cool, then air flow mode control to foot (heat) position, and pressing the Auto Blower (E) and Economy Mode (snowflake) button (F) at the same time. |
4730 Stuck on Canadian mode
