|
East Central Nebraska | A few years ago, I changed spraying tractors with a 3 point boom. I replumbed everything with brand new hoses filters etc. except for PTO pump. I was so proud of it and routed so neatly and looked good. I was surely disappointed as it struggled with getting pressure and was slow. I couldn't run any agitation. Worked beautiful before with a crappy set up. I put new pump on and no change. I decided to move filter from the inlet of the pump to the outlet side. Once I applied pressure, it squirted fluid everywhere out of the new filter housing. I didn't leak a drop on the suction side, but was sucking air. So just throwing that out there to check over as I was baffled and ready to start changing out the flow controller stuff.
| |
|
Sprayer/raven problems....posted in machinery talk too but no responses
