AgTalk Home
AgTalk Home
Search Forums | Classifieds (78) | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble 750 signal to Envisio Pro
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
farminsmall
Posted 5/13/2022 21:32 (#9659488 - in reply to #9659249)
Subject: RE: Trimble 750 signal to Envisio Pro


swmn
Digital output is for outputting a pulse signal, like a simulated radar speed. It doesnt matter in your case. You need to go into settings>system>advanced>port config if I recall correctly. The exact terms might vary a little. Select the port on the back of the display you have your output cable plugged into and set up that port to output nmea with the correct messages and message rates selected for the raven display. I dont know what the raven is looking for offhand, somebody else will hopefully comment on that.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)