|
SEQ, Australia | The Raven kit that John Deere uses to interface to these tractors gets pins removed and re-fitted to the tractor Nav Harness that goes to the back of the Nav Controller. Steering sensor is one of them. You will need to get someone with the Nav Harness schematics to work out which pins were removed and put back where they belong.
You will also have to make sure you have the correct vehicle profile loaded for the machine you are using - there are a few different ones based on the year/model and whether they are AG Ready or CAN also. The Nav Controller needs to be loaded with CNH Nav firmware - the Trimble Nav firmware will not work with a Pro700
Edited by Trimbleguy 5/8/2022 22:34
| |
|