AgTalk Home
AgTalk Home
Search Forums | Classifieds (154) | Skins | Language
You are logged in as a guest. ( logon | register )

CR 7 to run accuboom, scs 460 for rate control.
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 4/30/2022 17:32 (#9639386 - in reply to #9639376)
Subject: RE: CR 7 to run accuboom, scs 460 for rate control.


Near Intersection of I-35 & I-90 Southern Mn.
Not familiar with the CR7 but if the 460 is showing a steady speed (even when stopped?) then it sounds like it is set to a Self-Test speed as that would behave that way. The 460 should jump out of self-test speed and show actual speed when it receives a speed signal on the 3 pin Conxall plug that can be connected to a real radar gun, wheel speed, GPS puck for speed etc.

I'm thinking possibly there needs to be a cable coming from the CR7 to that plug just as if you were using one of the other speed devices. If there is such a plug, there may be a setting in the CRF7 that needs to be changed.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)