South Western Ontario , Canada | this is what we made, works great, made the opposite end, and set screwed it to the shaft so would not fall off, then put tractor pintle hitch on, and used a 1" longer draw bolt, the new pc at the bottom, was bigger in diameter of the 1.5 " draw pin hole
Edited by for farms 9/21/2021 12:13
 (142_0999 (full).jpg)
 (142_1000 (full).jpg)
 (142_1001 (full).jpg)
 (142_1002 (full).jpg)
Attachments
----------------
 142_0999 (full).jpg (79KB - 12 downloads)
142_1000 (full).jpg (113KB - 15 downloads)
142_1001 (full).jpg (81KB - 13 downloads)
142_1002 (full).jpg (183KB - 11 downloads)
|
great plains dril with cph 20 caddy
