Posted 11/26/2021 11:29 (#9342775 - in reply to #9341463) Subject: RE: Drilled powered winch ???
SE SD
I put a two speed winch on an auger that was a bear to raise and then built an adaptor to raise it using a corded half inch drill. It works well but the winch isnt the correct type. If you let go of the handle when lowering it will come crashing down. We are just careful. https://www.amazon.com/Goldenrod-14825-Winch-2-Speed-2500-LB/dp/B000...
Drilled powered winch ???
