| Hilltopper - 5/3/2021 23:35
Steer CTRL capabilites (first piece of the pie) I have No, No, No, for Curve, Reverse, Steer sensitivity. I think this is what let the tech to think it was an issue on the tractor.
Autotrac License is SF2, if that makes any difference.
Just had this same problem on an 8210 with SF 3000 and 2600 display. I know it's GS2 but still really similar. Dealer was pretty useless in terms of possible problems (I learned way more on here). I found out (not from the dealer) that these monitors are always "hot booting". Basically they are in a sort of standby state when the tractor is shut down. If you unplug it from the tractor and then plug it back in, it's forced to do a "cold boot". Takes a lot longer but doing this fixed ours. Tractor doesn't have to be running. With the key off just unplug it and plug it back in. Then fire it up and see if that helped anything. |
JD 8410 Autotrac not showing up on GS Display
