|
West Central Iowa | I have the primary ground speed set to GPS and the secondary set to transmission sensor. As far as the Port B thing I am not sure what determines port A or port B, I am sure I knew this a year ago last spring when I spent a bunch of time trying to get the autopilot to work with this receiver then, but I don't remember now. I am plugged into the RH receiver port when the ports are facing you, but I think port A and port B may be more of a setting vs and actual connection type. I think I used the Insight to switch between port A and port B and did not see any real difference in anything. I have not found the ground speed calibration setting nor do I see a place for ground speed to display when in the harvest run screen, but I need to spend some time reading the manual.
Thanks for your help! | |
|
Insight and 252 receiver settings for yield mapping??
