AgTalk Home
AgTalk Home
Search Forums | Classifieds (163) | Skins | Language
You are logged in as a guest. ( logon | register )

Insight and 252 receiver settings for yield mapping??
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 7/27/2020 10:50 (#8398920 - in reply to #8398819)
Subject: RE: Insight and 252 receiver settings for yield mapping??

Don't call it a 'gator, it's a Ranger
I forget where it is also but it is NOT on the harvest Run screen. It is there somewhere.

Here's a thought. Your GPS can be set to work with two different devices. One on Port A and another on Port B. These could be physically separate devices with the cable literally splitting and feeding each device. With the configuration program you are able to set each Port individually. They could both have the same settings or different settings with all kinds of combinations.

Possibly the Insight is running off of Port A which is giving the GPS location information but not the speed information. Port B might be outputting the GPS locations and the speed information but it is not getting to the Insight since it is connected to Port A.

Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)