North Western Alberta | midwestspray - 6/30/2020 10:18
Set test speed to 10mph, press area/hr button, turn on pump and one boom switch at a time, I expect you'll find there is one boom section that will show zero acres when it is on. If so, the rate controller is not receiving a signal from that related switch. Easy test to try.
I am confident this is the issue. I flipped one switch 180 degrees cause the valve seemed to be reverse acting, so the Raven isn't seeing the one boom. That would mean 55% area registering, which is exactly what it is.
Bam..... I will have to reverse the wiring at the valve, internally, and then put the switch back.
That I guarantee is the problem..... thanks!
Bob |
Raven 440 rate controller has me baffled
