AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Raven 440 rate controller has me baffled
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Mad Max Perf
Posted 6/30/2020 12:25 (#8345368 - in reply to #8345079)
Subject: RE: Raven 440 rate controller has me baffled



North Western Alberta
midwestspray - 6/30/2020 10:18

Set test speed to 10mph, press area/hr button, turn on pump and one boom switch at a time, I expect you'll find there is one boom section that will show zero acres when it is on. If so, the rate controller is not receiving a signal from that related switch. Easy test to try.


I am confident this is the issue. I flipped one switch 180 degrees cause the valve seemed to be reverse acting, so the Raven isn't seeing the one boom. That would mean 55% area registering, which is exactly what it is.

Bam..... I will have to reverse the wiring at the valve, internally, and then put the switch back.

That I guarantee is the problem..... thanks!

Bob
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)