|
SESD | 12v at the 2 pin plug on the module only means power to control the valve up and down. No green LED lights means the CAN system isn't communicating. That would be the small wires in the large implement cable or extension. From the display harness it would be the round style connector that goes to a Y connector, on the other side of the Y is another round connection that goes to the implement cable that goes out to the plow, next to that would be a plug with a blue end on it or the connections to an Ag Leader switchbox. The module on the plow has some CAN connections up there too, if the plow worked before there should be no need to change anything, only to inspect the connections. The end of the last connections is a terminator that should have a brown end. | |
|
Ag Leader Water Management Module not working
