AgTalk Home
AgTalk Home
Search Forums | Classifieds (69) | Skins | Language
You are logged in as a guest. ( logon | register )

Still struggling NTRIP and Trimble 252
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
pirlbeck
Posted 3/10/2019 20:42 (#7372476 - in reply to #7372262)
Subject: RE: Still struggling NTRIP and Trimble 252


West Central Iowa
DG N. AL - 3/10/2019 19:33

You should be configuring "PORT C" to either CMR or RTCM2.3.  Either will work.  I have used both in the past.  Your first post stated you are connected to port C.  I would turn RTKLNK off in port B.  I also recommend using port C.  The 252 has a history of auto-configuring port B and changing the settings on that port.  Don't use port B for your RTK correction input.



Iowa CORS does not have a RTCM2.3 listed . Here is what they show for available mount points.

CMR+ iMAX Automatic cell iMAX CMR+ 10000 CMRP_IMAX Network GPS
CMR+ Nearest Nearest site CMR+ 10000 CMRP_NEAR Single baseline GPS
RTCM 3.1 MAX Automatic cell MAX RTCM 3.x (Extended,1015,1016) 10000 RTCM3_MAX Network GPS/GLO
RTCM 3.1 iMAX Automatic cell iMAX RTCM 3.x (Extended) 10000 RTCM3_IMAX Network GPS/GLO
RTCM 3.1 Nearest Nearest site RTCM 3.x (Extended) 10000 RTCM3_NEAR Single baseline GPS/GLO
RTCM 3.2 MSM4 iMAX Automatic cell iMAX RTCM 3.x (MSM4) 10000 MSM_IMAX Network GPS/GLO/GAL
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)