Posted 3/10/2019 22:47 (#7372767 - in reply to #7372262) Subject: RE: Still struggling NTRIP and Trimble 252
NW KS
DG N. AL - 3/10/2019 19:33
You should be configuring "PORT C" to either CMR or RTCM2.3. Either will work. I have used both in the past. Your first post stated you are connected to port C. I would turn RTKLNK off in port B. I also recommend using port C. The 252 has a history of auto-configuring port B and changing the settings on that port. Don't use port B for your RTK correction input.
If anyone references this thread in the future I didn't read everything throughly and referenced the wrong port letter. The description of what the port settings do however are correct and should work with just about any Trimble receiver being configured with agremote.
Still struggling NTRIP and Trimble 252
