Vauxhall, Alberta, Canada | Hello,
Please allow me to pull this old post up again.
I installed a new Trimble FM-750 on my NH tractor and would like to map my seeding.
I use a JD752 drill and would like to map all three functions if they are used:
1. Seeding,
2. Seed placed fertilizer and
3. Mid-row banded fertilizer.
Is this possible, with the use of an on/off switch, or better with the rotational pickup at the last shaft before the product goes in the tube?
Any help would be much appreciated.
Cheers, Joerg
|
FM-750 remote mapping switch
