AgTalk Home
AgTalk Home
Search Forums | Classifieds (78) | Skins | Language
You are logged in as a guest. ( logon | register )

Sprayer/chemical loading pad, shed, set ups?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Ewfflyer
Posted 5/17/2015 09:27 (#4575195 - in reply to #4575142)
Subject: RE: Sprayer/chemical loading pad, shed, set ups?


EC IN
We use an old single axle van trailer. 2500gal water in front (filled from either 2" or tap water with its own shutoff), 250gal tank for glyphosate, 2 totes of Cinch, 1 tote of 2-4D, 1 tote of crop oil, one pallet of AMS in the back. We can refill any of the totes through RV windows we installed, as we as natural light. We have no check valves, suction side does have one induction tank with a valve on it as well as supply water valve. Have another on the pressure side that has a rinse tower to wash jugs, with valves to bypass it when not needed. Our pump is underneath infront of the axle to eliminate exhaust issues. Everything is plumbed for 2", no air to blow lines.

Up until this year we used a pickup sprayer with 500gal and 60' booms. Got a JD4720, so water could be an issue if we go hard, but we have some stationary tanks we parked next to to add supply. Works great, it's mobile if needed, but usually sits at home with a dolly we made to support the front.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)