Near Intersection of I-35 & I-90 Southern Mn. | The abaove posts are correct. Low limit is based on Gallons/minute not gallons/acre.
Most operators would like to see the low limit based on pressure but the Raven system does not pay attention to pressure so the Volume method is used.
When a Low limit number is entered the system will not apply less than that amount per minute. This number is factored downward if some of the booms are off.
When the ground speed slows down so much that the low limit takes effect, you will be overapplying. The console will beep and display a message indicating that the low limit is in effect. Once you speed back up to a more normal speed, the message goes away.
Having the proper tips is critical to having this all work out smoothly.
Edited by tedbear 4/6/2012 16:07
|