AgTalk Home
AgTalk Home
Search Forums | Classifieds (137) | Skins | Language
You are logged in as a guest. ( logon | register )

hooking up a boom switch on a 4720......
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Trapper
Posted 5/17/2006 08:19 (#12790 - in reply to #12782)
Subject: Re: hooking up a boom switch on a 4720......


Both sides of the Mason-Dixon Line
I'm aware of the problems with going directly from the flowmeter, but I couldn't see spending the extra money for the direct command kit if it wouldn't control the spraystar . We run a lot of small strips around here, and sometimes we only spray a 60 foot swath instead of the full 90, so I setup four configurations in the Insight, one for the 90 ft low rate, 90 ft high rate, 60 ft low rate, and 60 foot high rate, with the low rate configurations for one flow meter, and the high rate for both flowmeters.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)