|
| I've got a customer wanting to put a John Deere Dry Rate Controller on a Gandy 6680-GX18 air seeder. Has anyone done this before?
I'm curious if using the Raven 16-pin / 22-pin adapter harness would get most of the functionality working, and what would or wouldn't work. I doubt the clutch function would work when running the Dry Rate Controller as an Air Seeder setup, but I don't see why the rest of it wouldn't.
I've seen quite a few people put Ag Leader systems on these, but I haven't found much information on using a John Deere Dry Rate Controller. Any advice or experience would be appreciated.
 (Gandy schem (full).jpg)
Attachments
----------------
 Gandy schem (full).jpg (65KB - 5 downloads)
| |
|
Deere Dry RC on Gandy Air Seeder
