|
North Missouri | These are the connectors on a peterbilt 389 at the hood hinge point going to head lights and turn signals. Dealership has not been very helpful in sourcing the ends and pins. So I thought I would ask here. I am looking to create or make a short loom or where I can t into the running lights and turn signal, not t into factory harness, and still have weather tight connectors.
If I have corrosion in my run of loom I would still be able to unplug my section of loom and plug factory connectors back together and have factory turn signals. Will have the truck for a long time and every time I have taped into wiring on a truck I have always had corrosion at some point where wire was exposed.
 (91FE7ABB-76F8-41CD-A887-3BEAEC2A9F72 (full).jpeg)
 (8CD01585-6AC3-4EDB-AFA2-41E4BBA8F3B9 (full).jpeg)
 (2F15166B-C56F-47AE-AA12-D5D1CA8553C5 (full).jpeg)
Attachments
----------------
 91FE7ABB-76F8-41CD-A887-3BEAEC2A9F72 (full).jpeg (176KB - 109 downloads)
8CD01585-6AC3-4EDB-AFA2-41E4BBA8F3B9 (full).jpeg (65KB - 114 downloads)
2F15166B-C56F-47AE-AA12-D5D1CA8553C5 (full).jpeg (66KB - 113 downloads)
| |
|
Identify wire connectors
