|
| With a system like a Cruizer 2 and Smartrax md for instance, are the calibrations and settings needed for steering stored on the Cruizer 2 or the node or partly on both the cruiser and the node?
For instance, say one has a whole working md system on a particular tractor. If one was to remove the cruiser 2 from that tractor and replace it a different cruiser 2, would the whole steering system need to be recalibrated because the steering settings were stored on the first (removed) cruiser 2 or should it work with the second cruiser like nothing changed because every thing the steering system needs is stored on the node?
Edited by sparrell 1/18/2019 15:55
| |
|