roaming | Farmer 4 ever - 5/28/2015 04:10
It was my understanding torn but it looks to be working the other way around according to the owner manual, haven't tried it yet though. But if you are right and must put the lowest value possible, I'm kinda screwed as this value can't go low enough for my situation... I'm still waiting for some parts to install on my planter before storing it. After I'll unhook the tractor and try it.
Setting your Minimum Turning Radius to 15.5 feet means that you can create a swath that has a curve with a 31' diameter, and the system will be able to drive it. I would be willing to bet that you can't actually drive a 31' circle with your planter in the ground, so 15.5' should be plenty low. As midwest mentioned, using your implement width is usually a good number. With very wide implements like spray booms, you might use a lower number.
Edited by torn 5/28/2015 09:44
|
Sharp turns with Pro 700
