|
Western WI | The 2 pusher bolts are threaded into the casting, take the 3 other bolts out and get the wedge worked out of there. the pusher can stay where they are. Then on the side of the casting to the inside of the tractor there are 3 more bolts, takes 1 1/8 wrench take them out too as long as you have the whole thing on the ground. If you have a parts breakdown, get everythgin tore apart that you can. If you need to you can pull the cork plug for the pinion bolt and try to puns that out. Its is keyed and tapered where it goes through the gear. | |
|
Deere wedge hubs
