|
| Pulled our 2388 out lots. Have brackets built for front axle with slings run to back. Hook 4wd to the two slings with a shackle and pull in the direction that gets the deeper wheel to come up first. On the bad ones we will have the 4wd pulling on the front axle slings and wrap a sling around the frame y point at back end and have s mfwd tractor pulling at an angle to get the combine to start to come around. Pulling on back frame only to pivot combine.
Picture is from yesterday on the 1660, was a two tractor pull and had to swing the combine pivotting around the stuck wheel so as to get to a direction with better footing. I would never put all pulling power on the back frame, main pull is on front axle.
Edited by 69Cat 9/20/2014 10:39
 (20140919_102801.jpg)
Attachments
----------------
 20140919_102801.jpg (78KB - 123 downloads)
| |
|
Pulling a stuck caseih 2388 out of the mud?
