|
North Central Iowa | On my Deere the numbers on the 37 pin connector correspond the the sensor wires going to row 1-16. I think power and ground are all tied together and branch out to all the rows. If you're not getting continuity from the sensor wire (the green one) on row 10 where it hooks to the row sensor and pin number 10 on the 37 pin connector, you've either got a broken wire or a bad connector in that line. I just went through this on my 1770. I turned out to be the wire in the 37 pin connector had slipped back and was making intermittent contact on row one. Sometimes it worked and sometimes it didn't. Hopefully I've got it fixed now but with the snow today it's going to be a few days before I can get back to the field and verify that it's fixed. | |
|
Need help trouble shooting monitor cable-Kinze 3600- 20-20 monitor
