|
| I know this is a late reply but go to you diagnostics (Main Menu > GS2 > C > change the view drop down to swath control). Make sure that overlap control is on and at the bottom there will be a bunch of numbers next to swath/section control command. These numbers will tell you whats going on. For example, all 2s will tell you that you are outside of an exterior boundary. The legend is below telling what the numbers mean. I have seen where there is drift with SF1 of the boundary and overlap control will not work. In this case, redefining the boundary fixes it. | |
|
gs2 2600 not recording when overlap control on??
