AgTalk Home
AgTalk Home
Search Forums | Classifieds (19) | Skins | Language
You are logged in as a guest. ( logon | register )

GS2, Swath Control delay... still going on
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
mcline
Posted 5/26/2011 15:53 (#1793204 - in reply to #1792841)
Subject: Re: GS2, Swath Control delay... still going on


Ladoga, IN, United States, North America, Earth
I was wanting to see if the outside 2 sections would turn on and put out smoke with the middle off.

Does the section show it is coming on when you come out of the headlands correctly? Does it matter which side comes out first or does both sides do it?

If you go into your Menu > Greenstar Pro > Diagnostics > Swath Control. Close to the bottom you will see something that says Section Status. It will have 3 numbers after it each representing a Section. Under that is a legend telling you what the numbers are. Watch that when coming out of the headland and see what the section status says, if they change correctly or they hang up.

You could always try and reprogram the rate controller, if that doesn't work see if your dealer has a rate controller you can pop on there real quick and see if that fixes the issue. That would tell us whether its in the rate controller or a wiring/plumbing issue.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)