Ladoga, IN, United States, North America, Earth | I would like a picture of your Anhydrous Plumbing.
Reading through your previous post, this might help you understand what the turn on/off times and all the settings for swath control help with. http://precision-nerd.com/blog/?p=122
What is your Valve type. Fast, Fast Close or Standard? I run our NH3 Bars at 5 sec. turn on. You have to make sure that you have plenty of time with the implement down and the switch engaged to get everything turned on and up to speed.
I don't use an implement switch on our NH3 bars, just the foot switch. What I have found is that the implement switch is too slow to turn on and too slow to turn off. I just make a jumper wire and put in there. |
GS2, Swath Control delay... still going on
