Slicker than a Yes album. | Have ours set up as liquid fert tool. Also, have wired in a separate height switch for the RC. Same on as used for the CCS fan on the middle row. Check all your wiring again, (I know, you probably did, but you never know) Could be that you have a bad RC, I've heard of some that crap out after a year. This is on a '11 DB with row command, and 2 section fert set up to also be controlled by a Raven 450 if need be. (12 and 12 rows) |
1770nt with row command and JD rate controller
