|
Cedar Bluff, AL | Yes you all are correct. It must be a cable. I replaced the sensor and nothing changed. It worked fine for a little while this morning while it was cool. After it heated up the monitor speed indication stopped working, but the corner post speed indication continued working. I'm gonna have to go to the John Deere service department and see if they can find me a speed sensor wiring diagram to see where the monitor signal splits off. There is only 2 wires connected to the speed sensor. So either the monitor wires are split off of these 2 wires somewhere, or they are paralelled somewhere. Either way I will have to have a wiring diagram to figure it out. But thanks for all of you alls help. | |
|