|
Cedar Bluff, AL | Did the test. Speed indication on corner post/machine speed worked fine. Speed indication area/hour total/area on the monitor all work for a minute. When the monitor was working speed indication on corner post and the monitor were almost identical. And then the speed signal on the monitor went away and monitor stopped working. I changed the speed signsl to make sure I didn't miss anything. The results were the same. The monitor did not work.The volume test worked fine. Volume/min, total volume and tank volume work as they should. I Selected boom 1, then cut boom 1 off and selected boom 2, cut boom 2 off and then selected both booms on and the volume displays were changing as they should. Any suggestions on this problem would be gratly appreciated.TIA. | |
|