|
| After running it a little this evening, the problem is clearer now. Exiting the headland (or any covered area) the section valve will open with the first section, but the fast close will not. So, the SwathControl is working properly to activate the section valve, but the fast close valve will not open until at least two of the sections are open.
Additionally, it is intermittent/not consistent. I was running some pretty steep point rows and it clicked on every time without fail. I have never seem it work that well; so, I wondered later if there was a gap between the two endrow passes causing it to flicker on/off very briefly before entering the full, straight pass.
It is only guess work as to why it works sometimes and not others, but I do think the specific issue could be described as the fast close valve not opening initially unless two sections are open.
Do you all have any thoughts to this end? Thanks. | |
|
GS2, Swath Control delay... still going on
