Viewing a forum - Precision Talk

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 662 663 664 665 666 667 ... 668 669 670 671 672 673 674 ... > Forums List -> Precision Talk

2630 control swath control on Top air sprayer? - johndeere430u : 4/14/2013 17:53
- Re: 2630 control swath control on Top air sprayer? - PrecisionNE : 4/15/2013 09:37
  - Re: 2630 control swath control on Top air sprayer? - johndeere430u : 4/15/2013 19:35
- RE: 2630 control swath control on Top air sprayer? - straightupdownunder : 4/18/2013 08:00

Cabcam to Trimble CFX 750 setup? - wsoh farmer : 4/14/2013 17:13
- RE: Cabcam to Trimble CFX 750 setup? - SDhusker : 4/14/2013 17:20
  - RE: Cabcam to Trimble CFX 750 setup? - wsoh farmer : 4/14/2013 17:25
    - Re: Cabcam to Trimble CFX 750 setup? - softtail : 4/14/2013 17:55
      - Thanks softtail - wsoh farmer : 4/14/2013 18:23

Pro 700 and White 8500 planter - funtimes : 4/14/2013 16:40
- Re: Pro 700 and White 8500 planter - RAZ : 4/14/2013 17:41
- Re: Pro 700 and White 8500 planter - Mbmaring : 4/15/2013 22:23
  - Re: Pro 700 and White 8500 planter - torn : 4/17/2013 13:37

help with surevacs on 2008 1770nt ccs - OHIO78 : 4/14/2013 13:52
- RE: help with surevacs on 2008 1770nt ccs - jesse : 4/14/2013 15:36
- Re: help with surevacs on 2008 1770nt ccs - AMSGRNSTAR : 4/14/2013 17:38

Trimble boom height for FMX1000 - midksfarm : 4/14/2013 13:40
- RE: Trimble boom height for FMX1000 - Trimble bud : 4/14/2013 14:44
  - RE: Trimble boom height for FMX1000 - J. Sheehan : 4/14/2013 15:20
    - Re: Trimble boom height for FMX1000 - softtail : 4/14/2013 15:41

Slingshot in case tractors - nevinstobbe : 4/14/2013 10:51
- RE: Slingshot in case tractors - JHEnt : 4/14/2013 13:17

Exporting from SMS basic to Pro 600 - Keith Mudd : 4/14/2013 10:28
- Re: Exporting from SMS basic to Pro 600 - torn : 4/14/2013 12:52
  - Re: Exporting from SMS basic to Pro 600 - Keith Mudd : 4/14/2013 14:05

Sure vacs on 1770 question - haybstr67 : 4/14/2013 10:28
- Re: Sure vacs on 1770 question - jd8560 : 4/14/2013 10:38
- Re: Sure vacs on 1770 question - TS79 : 4/14/2013 10:43
- Re: Sure vacs on 1770 question - haybstr67 : 4/14/2013 11:15
  - Re: Sure vacs on 1770 question - farminguy : 4/14/2013 15:41

Making use of all this technology.... - CRJ : 4/14/2013 09:58
- RE: Making use of all this technology.... - arcticcatfarmer : 4/14/2013 14:36
  - RE: Making use of all this technology.... - CRJ : 4/14/2013 15:42
    - RE: Making use of all this technology.... - arcticcatfarmer : 4/14/2013 16:50
      - Re: Making use of all this technology.... - mit9750 : 4/15/2013 21:21
        
        Re: Making use of all this technology.... - CRJ : 4/17/2013 06:54

Vanguard 2600 to CFX 750 - J Farm : 4/14/2013 08:51
- Re: Vanguard 2600 to CFX 750 - DylanJoyceFarms : 4/14/2013 22:39

Basic question about row clutches/GPS - 4WD : 4/14/2013 08:38
- Re: Basic question about row clutches/GPS - mdnelson86 : 4/14/2013 08:45
- Re: Basic question about row clutches/GPS - torn : 4/14/2013 08:46
- Re: Basic question about row clutches/GPS - jd8560 : 4/14/2013 10:41
- Re: Basic question about row clutches/GPS - KinzeMech : 4/14/2013 13:38
  - Thanks everyone - 4WD : 4/14/2013 17:58
    - RE: Thanks everyone - KinzeMech : 4/14/2013 18:03

pro 600 speed output - bobiz : 4/14/2013 08:14
- Re: pro 600 speed output - torn : 4/14/2013 08:16
- Re: pro 600 speed output - bobiz : 4/14/2013 09:03
  - Re: pro 600 speed output - torn : 4/14/2013 12:53
- Re: pro 600 speed output - bobiz : 4/14/2013 09:07
  - Re: pro 600 speed output - torn : 4/14/2013 12:56
- RE: pro 600 speed output - JHEnt : 4/14/2013 13:23

MF 4880 on ez steer / trimble 500 display - burky8520 : 4/14/2013 06:45
- Re: MF 4880 on ez steer / trimble 500 display - Dave9699 : 4/14/2013 08:51
- RE: MF 4880 on ez steer / trimble 500 display - winner2011 : 4/14/2013 21:36
- RE: MF 4880 on ez steer / trimble 500 display - burky8520 : 4/19/2013 22:51

ez steer settings - co2shaun : 4/13/2013 22:49
- Re: ez steer settings - PF Mike : 4/14/2013 10:50
  - Re: ez steer settings - co2shaun : 4/14/2013 20:01

JD 9770 and Trimble 500 - agsurfer : 4/13/2013 22:14
- Re: JD 9770 and Trimble 500 - Bleed CIH Red : 4/15/2013 09:49

Integra Intellislope ????????? - redfarmer72 : 4/13/2013 21:21
- Re: Integra Intellislope ????????? - Fingers77 : 4/13/2013 21:27
- RE: Integra Intellislope ????????? - redfarmer72 : 4/13/2013 21:31
  - Re: Integra Intellislope ????????? - Fingers77 : 4/13/2013 21:45
- Re: Integra Intellislope ????????? - WTW : 4/13/2013 22:03
  - Re: Integra Intellislope ????????? - TS79 : 4/14/2013 07:51
    - Re: Integra Intellislope ????????? - Scott (OSU) : 4/14/2013 07:56
      - Re: Integra Intellislope ????????? - TS79 : 4/14/2013 08:45
        
        Re: Integra Intellislope ????????? - Scott (OSU) : 4/14/2013 11:54
        
        Re: Integra Intellislope ????????? - TS79 : 4/14/2013 21:50
      - Re: Integra Intellislope ????????? - bswenseth : 4/14/2013 11:14
        
        Re: Integra Intellislope ????????? - Scott (OSU) : 4/14/2013 20:22
        
        IMD-600 pitch control - bswenseth : 4/14/2013 20:53
        
        RE: IMD-600 pitch control - Scott (OSU) : 4/14/2013 21:16
- Re: Integra Intellislope ????????? - bswenseth : 4/14/2013 11:10
- Re: Integra Intellislope ????????? - TS79 : 4/14/2013 11:57
  - Re: Integra Intellislope ????????? - bswenseth : 4/14/2013 13:19
- RE: Integra Intellislope ????????? - redfarmer72 : 4/14/2013 12:23
  - Re: Integra Intellislope ????????? - TS79 : 4/14/2013 12:36
    - Re: Integra Intellislope ????????? - bswenseth : 4/14/2013 13:22
  - pro600/700 with Case Planter - bswenseth : 4/14/2013 21:29
- RE: Integra Intellislope ????????? - redfarmer72 : 4/14/2013 12:52
  - RE: Integra Intellislope ????????? - TS79 : 4/14/2013 14:02
    - RE: Integra Intellislope ????????? - bswenseth : 4/14/2013 14:31
- RE: Integra Intellislope ????????? - bleedred : 4/14/2013 16:25
- Re: Integra Intellislope ????????? - wood_6 : 4/16/2013 22:48

ram mounts - Cyjd : 4/13/2013 21:10
- Re: ram mounts - Colorblind : 4/13/2013 21:12
  - Re: ram mounts - Ron..NE ILL..10/48 : 4/14/2013 08:16
    - Re: ram mounts - Colorblind : 4/14/2013 10:22
- Re: ram mounts - NEILFarmer : 4/13/2013 21:16
- Re: ram mounts - Fingers77 : 4/13/2013 21:24
  - Re: ram mounts - gpsdude : 4/13/2013 22:21
- Re: ram mounts - vox populi : 4/14/2013 04:58
- RE: ram mounts - Duane in ND : 4/14/2013 06:53
  - Re: ram mounts - Dave9699 : 4/14/2013 09:05
    - Re: ram mounts - coyotehunter : 4/14/2013 09:56
      - Re: ram mounts - Dave9699 : 4/14/2013 09:59
- RE: ram mounts - nd_ag_guy : 4/14/2013 11:28
  - RE: ram mounts - swontbeetfrmr : 4/14/2013 11:53
- Ram Mount Direct - Bobby Greif : 4/14/2013 14:20
  - RE: Ram Mount Direct - nevinstobbe : 4/14/2013 16:28
- Re: ram mounts - cropdude : 4/15/2013 08:59

saving A-B lines and field names from a 750 - kb ag : 4/13/2013 20:58
- RE: saving A-B lines and field names from a 750 - co2shaun : 4/13/2013 22:44
  - RE: saving A-B lines and field names from a 750 - kb ag : 4/13/2013 23:03

3640 Spra Coup and ontrac2 - gemarsh : 4/13/2013 20:10
- Re: 3640 Spra Coup and ontrac2 - snsw no till : 4/14/2013 15:16

universal displey plus value - ihman : 4/13/2013 19:35
- RE: universal displey plus value - redfarmer72 : 4/13/2013 21:03
  - Re: universal displey plus value - ihman : 4/13/2013 21:36
    - Re: universal displey plus value - ihman : 4/13/2013 22:08
- RE: universal displey plus value - Radiehl : 4/13/2013 23:18
  - Re: universal displey plus value - hawkeye76 : 4/14/2013 10:45

Sure Vac & slip plate conflict? - Jason Hinson : 4/13/2013 17:58
- RE: Sure Vac & slip plate conflict? - sf 1066 : 4/14/2013 18:48
  - Re: Sure Vac & slip plate conflict? - Jason Hinson : 4/14/2013 18:58

FarmBlimp - Your Taxes at Work? - MidNight Mapper : 4/13/2013 16:41

figured it out nt - wheaties : 4/13/2013 16:37
- Re: can you merge two clients into one in APEX? - SWMN-JD : 4/13/2013 16:56

Kinze and rawson drives - panotiller : 4/13/2013 16:23
- Re: Kinze and rawson drives - KinzeMech : 4/13/2013 20:56
  - Re: Kinze and rawson drives - panotiller : 4/14/2013 12:58
    - Re: Kinze and rawson drives - KinzeMech : 4/14/2013 13:14
    - Re: Kinze and rawson drives - btruck : 4/15/2013 18:53
- Re: Kinze and rawson drives - KinzeMech : 4/16/2013 06:35

Good Measure Liquid Flow Controller - Farmer4life01 : 4/13/2013 16:17

AP toolbox - Crows : 4/13/2013 15:48
- Re: AP toolbox - Fingers77 : 4/13/2013 21:57
- Re: AP toolbox - rheuch : 4/14/2013 13:22
- Re: AP toolbox - Crows : 5/3/2013 21:24

750 in constant re-boot cycle - kb ag : 4/13/2013 15:39
- Re: 750 in constant re-boot cycle - Mbmaring : 4/13/2013 18:03
- Re: 750 in constant re-boot cycle - Nebraska Sandhiller : 4/13/2013 19:26
- RE: 750 in constant re-boot cycle - kb ag : 4/13/2013 20:09

what do I need to use Trimble's X-Fill? - CUBE : 4/13/2013 14:55
- RE: what do I need to use Trimble's X-Fill? - Trimble bud : 4/13/2013 18:29
  - Re: what do I need to use Trimble's X-Fill? - CLLEWISON : 4/15/2013 08:06

Trimbe MS 750 base - cnycyclone : 4/13/2013 13:54
- RE: Trimbe MS 750 base - co2shaun : 4/14/2013 10:12
  - Re: Trimbe MS 750 base - cnycyclone : 4/14/2013 15:00

Problems exporting seeding prescriptions from EasiSuite to 20/20 - Jmark71 : 4/13/2013 13:32
- RE: Problems exporting seeding prescriptions from EasiSuite to 20/20 - arcticcatfarmer : 4/13/2013 17:23
  - RE: Problems exporting seeding prescriptions from EasiSuite to 20/20 - Jmark71 : 4/13/2013 18:32
  - RE: Problems exporting seeding prescriptions from EasiSuite to 20/20 - Jmark71 : 4/14/2013 07:34

JD mobile farm for Ipad - R2farm : 4/13/2013 13:14
- Re: JD mobile farm for Ipad - psbrent2 : 4/13/2013 15:01
  - Re: JD mobile farm for Ipad - R2farm : 4/13/2013 22:04
- Re: JD mobile farm for Ipad - GarageGuy : 4/14/2013 20:48
- Re: JD mobile farm for Ipad - psbrent2 : 4/15/2013 07:12

pin out of port A to export NMEA out of 750 - kb ag : 4/13/2013 13:02
- RE: pin out of port A to export NMEA out of 750 - co2shaun : 4/13/2013 23:04
  - RE: pin out of port A to export NMEA out of 750 - kb ag : 4/13/2013 23:33
    - RE: pin out of port A to export NMEA out of 750 - co2shaun : 4/14/2013 09:54
      - RE: pin out of port A to export NMEA out of 750 - kb ag : 4/14/2013 10:13
        
        RE: pin out of port A to export NMEA out of 750 - co2shaun : 4/14/2013 10:42
- Re: pin out of port A to export NMEA out of 750 - Tom N : 4/14/2013 16:47

how do you set up a jd 2600 to receive GPS from a non-deere source - kb ag : 4/13/2013 12:09
- Re: how do you set up a jd 2600 to receive GPS from a non-deere source - SWMN-JD : 4/13/2013 14:40
  - Re: how do you set up a jd 2600 to receive GPS from a non-deere source - kb ag : 4/14/2013 10:19
    - Re: how do you set up a jd 2600 to receive GPS from a non-deere source - Dempstar83 : 9/16/2023 17:41
- Re: how do you set up a jd 2600 to receive GPS from a non-deere source - QuAppelle : 4/13/2013 16:30

Raven 450 running electric pump - JMRfarmer : 4/13/2013 11:14
- RE: Raven 450 running electric pump - tedbear : 4/13/2013 12:29
  - Re: Raven 450 running electric pump - DevinF : 4/15/2013 02:05

Pro 600 Memory Card problems PF 103 - Keith Mudd : 4/13/2013 10:51
- Re: Pro 600 Memory Card problems PF 103 - Dave9699 : 4/13/2013 11:09
- RE: Pro 600 Memory Card problems PF 103 - torn : 4/13/2013 12:01
  - Re: Pro 600 Memory Card problems PF 103 - Keith Mudd : 4/13/2013 13:08
    - Re: Pro 600 Memory Card problems PF 103 - torn : 4/13/2013 21:42
- RE: Pro 600 Memory Card problems PF 103 - JHAurora : 4/14/2013 04:36
  - Re: Pro 600 Memory Card problems PF 103 - Keith Mudd : 4/14/2013 14:03

trimble 750 pin out - REDMAN2188 : 4/13/2013 10:05
- RE: trimble 750 pin out - co2shaun : 4/13/2013 10:17
  - RE: trimble 750 pin out - tedbear : 4/13/2013 12:33

8010 combine won't move - Keith Mudd : 4/13/2013 09:43
- Re: 8010 combine won't move - torn : 4/13/2013 10:07
- Re: 8010 combine won't move - Keith Mudd : 4/13/2013 10:30
  - Re: 8010 combine won't move - newag1 : 4/13/2013 10:46
  - Re: 8010 combine won't move - Keith Mudd : 4/13/2013 11:32
    - Re: 8010 combine won't move - torn : 4/13/2013 12:02
      - Re: 8010 combine won't move - Keith Mudd : 4/13/2013 13:10
- Re: 8010 combine won't move - WildBuckwheat : 4/13/2013 13:25
  - Re: 8010 combine won't move - Keith Mudd : 4/13/2013 14:07
    - Re: 8010 combine won't move - johnny skeptical : 4/13/2013 18:19
      - Re: 8010 combine won't move - Keith Mudd : 4/14/2013 13:46

cnh usb data sticks - MADFARMS : 4/13/2013 08:58
- Re: cnh usb data sticks - torn : 4/13/2013 09:19
- Re: cnh usb data sticks - MADFARMS : 4/13/2013 11:32
  - Re: cnh usb data sticks - torn : 4/13/2013 12:33
    - Re: cnh usb data sticks - MADFARMS : 4/13/2013 14:15
    - Re: cnh usb data sticks - WLR : 4/13/2013 15:59
- Re: cnh usb data sticks - cropdude : 4/13/2013 21:13
- Re: cnh usb data sticks - ag4life : 4/13/2013 22:05
- Re: cnh usb data sticks - Jason_WI : 4/13/2013 22:29

? about pro 700 and deere 1770 - jcfarmboy : 4/13/2013 08:29
- Re: ? about pro 700 and deere 1770 - Rod! : 4/13/2013 09:11
- RE: ? about pro 700 and deere 1770 - torn : 4/13/2013 09:18
  - RE: ? about pro 700 and deere 1770 - jcfarmboy : 4/13/2013 09:35
    - RE: ? about pro 700 and deere 1770 - torn : 4/13/2013 09:39
- Re: ? about pro 700 and deere 1770 - jcfarmboy : 4/13/2013 12:41
  - Re: ? about pro 700 and deere 1770 - torn : 4/13/2013 21:47
- Re: ? about pro 700 and deere 1770 - jcfarmboy : 4/13/2013 12:46

Headland pattern won't work properly in ez 500 - rusty1 : 4/13/2013 06:36
- RE: Headland pattern won't work properly in ez 500 - rusty1 : 4/14/2013 21:53
- Re: Headland pattern won't work properly in ez 500 - poorboy : 4/16/2013 11:11

Integra/SeedCommand - PacerVol : 4/13/2013 05:58
- RE: Integra/SeedCommand - tedbear : 4/13/2013 06:52
  - Re: Integra/SeedCommand - breken : 4/13/2013 07:06
- Re: Integra/SeedCommand - KinzeMech : 4/13/2013 07:05
  - Re: Integra/SeedCommand - FarmWeather : 4/13/2013 07:14
- Re: Integra/SeedCommand - WI Jeff : 4/13/2013 11:54
  - Re: Integra/SeedCommand - 3weeksbehind : 4/13/2013 20:52
    - Re: Integra/SeedCommand - KinzeMech : 4/13/2013 21:10
      - Re: Integra/SeedCommand - 3weeksbehind : 4/13/2013 23:11
        
        Re: Integra/SeedCommand - WI Jeff : 4/14/2013 09:19
        
        Re: Integra/SeedCommand - KinzeMech : 4/14/2013 10:14
    - Re: Integra/SeedCommand - NEILFarmer : 4/14/2013 10:40

ag leader intellislope - shucks : 4/13/2013 04:17
- Re: ag leader intellislope - TS79 : 4/13/2013 07:02

variety tracking on Pro 600/700 at planting - notilltom : 4/12/2013 22:23
- Re: variety tracking on Pro 600/700 at planting - torn : 4/12/2013 22:43
  - Re: variety tracking on Pro 600/700 at planting - notilltom : 4/12/2013 23:13
    - Re: variety tracking on Pro 600/700 at planting - torn : 4/12/2013 23:20

can an insight communicate with a cfx750? - thatsoliver : 4/12/2013 22:20
- RE: can an insight communicate with a cfx750? - co2shaun : 4/13/2013 00:14
  - RE: can an insight communicate with a cfx750? - tedbear : 4/13/2013 07:03
    - Re: can an insight communicate with a cfx750? - thatsoliver : 4/13/2013 09:08

Moving reciever on JD Greenstar back - sioux : 4/12/2013 20:00

Headland pattern help for dummy (FM750) - Nebraska Sandhiller : 4/12/2013 17:08
- Re: Headland pattern help for dummy (FM750) - Fingers77 : 4/12/2013 18:01
  - Re: Headland pattern help for dummy (FM750) - Nebraska Sandhiller : 4/12/2013 20:44
- RE: Headland pattern help for dummy (FM750) - johndeere76 : 4/12/2013 18:51
  - RE: Headland pattern help for dummy (FM750) - Nebraska Sandhiller : 4/12/2013 20:53
    - RE: Headland pattern help for dummy (FM750) - co2shaun : 4/13/2013 00:02
- Re: Headland pattern help for dummy (FM750) - jd8560 : 4/12/2013 19:30
  - Re: Headland pattern help for dummy (FM750) - Nebraska Sandhiller : 4/12/2013 20:58
- RE: Headland pattern help for dummy (FM750) - arcticcatfarmer : 4/12/2013 21:00
- Re: Headland pattern help for dummy (FM750) - ih_jon : 4/13/2013 07:01

fmx field IQ imp lift switch - 680mac : 4/12/2013 15:23
- Re: fmx field IQ imp lift switch - Fingers77 : 4/12/2013 17:55
- Re: fmx field IQ imp lift switch - 680mac : 4/12/2013 18:51
  - Re: fmx field IQ imp lift switch - softtail : 4/12/2013 20:35

chn accucontrol - lilred : 4/12/2013 12:26

Trimble Seed Monitor Set up question. - crb : 4/12/2013 11:20
- Re: Trimble Seed Monitor Set up question. - gerstner4 : 4/13/2013 07:21

Please help me with Icroptrak - 123agscout : 4/12/2013 11:07
- RE: Please help me with Icroptrak - Hutchia : 4/29/2013 18:53

Jump to page: < 662 663 664 665 666 667 ... 668 669 670 671 672 673 674 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)