|
South Texas | I was certain I made a detailed post about it, sure can’t find it now.
No I doubt the electric plugs in. The factory air fitting did fit. Compressor mounts in the same spot as the factory one, but used a hose clamp instead of the fancy one. This compressor is a little bigger than the deere one and seems much better quality.
The mounting feet had to come off. I remember one end just unbolted, and on the other end it was needed as part of the compressor end cap so I took it off, cut the feet off, and put it back on.
Edited by eight 5/6/2021 16:59
 (FF436F5B-3141-418C-ACD4-2EC0AB594A50 (full).jpeg)
Attachments
----------------
 FF436F5B-3141-418C-ACD4-2EC0AB594A50 (full).jpeg (120KB - 4 downloads)
| |
|
JD 8X20 seat compressor
