|
| When opening a field, a screen with loaded prescriptions shows up. You then from a drop down box choose which channel you wish the prescription to be paired to.
If you have it set for seeding with a left and right side of the planter, you ought to have them tied together in the planting setup, therefore it should apply the prescription to both sides.
If you have them set as separate channels with separate products, then you I suppose have to apply the prescription to each side individually. I suppose that is how it works, I have never applied a prescription to anything other than one paired channel.
Your seed monitoring is only looking at half the planter? Not sure what you mean by the seed module being paired to the left side only. | |
|
Field IQ module not connected.
