|
North Dakota | This is an old thread that has the pinouts and instructions. It does not connect to the 250, it connects to the ez-steer 25 pin in the center of the three connectors. You turn it on in the system setup. Logging switch to turn on mapping in the 250 is in a different place on the 250 12 pin connector, do not put 12 volts to this pin or it WILL brick your 250.
Lots of info here using the search engine.
https://talk.newagtalk.com/forums/thread-view.asp?tid=18977&posts=19... | |
|
Ez guide 250 foot switch
