|
| If you have a USB stick in it, take it out and see if it works better. One of our tractors likes to corrupt USB drives and causes boot up issues. You can put a new one in it and it works for awhile then corrupts it again. Very frustrating. Also, we run our intelliview 4 (same as pro700) for autosteer and output nmea to an ag leader to control planter. We don't use the port b on the 372. Instead the is a place to hook a cable into the wiring harness and you can tell the pro700 what to output. This gives a corrected signal through the nav2. | |
|