Alberta | Josh7 - 3/6/2021 13:11
I used a CFX750 and a FMX and it will be APMD without the limitations EZpilot pro has.
You don't need the autosence and the IMD600 should be disconnected.
There is a harness from Trimble between NAV and EZpilot motor but that is expensive.
You are saying they autosense is not needed? That is contrary to what the install link says. Does your wiring change eliminate the need for the autosense? That would be contrary to what the diagram indicates. Also, I would for sure need the harness that ties the ezpilot to the nav controller? or not? |
Autopilot Motor Drive????
