|
NE Nebraska | You need the display, gen 1 or 2 will work fine for just monitoring. Universal Display harness, smart connector( gen 1 and 2 will work with both displays, gen 2 will need a seed repeater if you want the 2630 to see data too). Since you have a 250 monitor in the cab, you can keep everything in the cab and no need add any cabling on planter.
For clutches, you need to add a CCM specific to your display, row flow module and clutches on planter. Then the appropriate harnessing for your clutches. | |
|
20/20 questions
