|
South Western Ontario | You did not describe the conditions you are working in but a couple of things I would check, in the advanced settings of the OT2 there is a spot to set the level of resistance required to kick out the OT2. The number may need to be higher(900 or up). If you are in soft ground and the steering is tougher in some places this could be the reason.
Are you using a remote switch to engage and disengage? Any chance it is rough conditions and the switch is getting hit? If this is a possibility in the settings, disable the remote disengage function and use the steering wheel to disengage.
Just a couple of things I have had to change under certain conditions. | |
|