|
so.wisconsin | On a gen one if remember corrects you use the planter monitor harness 32 pin plug and plug that into smart connector then on the other end of smart connector is where channel A plugs into and if you want you can keep,say the Deere 250 monitor by getting a short MxF 32 pin harness and plug into smart connector and tractor side of Deere there is a brain box on the planter fo the row flow if you are using row clutches and or hyd.drive the tractor harness is to battery for power to 2020 and
A GPS puck for speed. and for row clutching on row flow also for hydraulic drive you should hook radar into back of the row flo switch box for this you need a globe instead of gps puck again if remember correctly it been 8 yrs
Smoke
| |
|
20/20 help
