|
| We are just getting a strip-till machine up and running to apply liquid at rates of 35-45 gpa. We are using Deere rate controller connected to Raven flowmeter, Raven Standard valve, raven section valves. We can get flow, but rates are keep fluctuating. We adjust hyd flow to the pump and before too long the rates have move again. The servo valve is plumbed in the bypass line instead of inline before the flow meter, just fyi.
Any thoughts on what we can do?
Edited by Crescent 4/22/2009 23:14
| |
|
Liquid fertilizer eratic rates in strip-till
