Posted 11/22/2020 18:52 (#8616959 - in reply to #8614864) Subject: RE: Meyers vb750
We used to have a VB750. Never again. If you crawl under the back of your spreader and look up at the sprockets and drive shaft you will see that they flex in the middle and allow the chain to jump. You will be able to see this by looking at the plastic floor and you will see the floor will be wiped clean from the flex. We where able to fix the issue by welding a 1/2” by 6”x the width of the spreader, piece of flat iron to the rear support. We laid the steel in between the back 2 floor cross members.