|
Boone, Iowa | I got my setup working the other day and worked great during my NH3 application. I figured out I need to get a boom sense adapter that will work with my remote on/off switch for the NH3 bar. I have been trying to fine tune in the agressiveness and the sensitivity of the system. I noticed, when traveling at an angle in bean stubble, I can feel the tractor wanting to search a little bit. It does not show up with the straightness of the toolbar, but gets a little annoying after a while. I tried playing with the agressiveness and sensitivity, but could not calm it down. Anyone have ideas on what I should be adjusting? Thanks. | |
|