SE Manitoba | stevebrownia - 8/6/2020 01:53
We need to move the front wheels in about 1 1/2" on each side on our caseih 7130 mfwa tractor. The wheel #1 is on the inside of #3 and we need to space the wheel out about 1 1/2" more to get it to track down the center of the row better. Any one know of any spacers you can get or have done this . Thanks
You may need to by different #3s.
You only have 4 possible positions given the parts that you have.
Changing either of #1 or #3 will change those measurements.
You may not have an option commercially for what you want - - - -especially if you're only looking for a small change, say 1".
There is a possibility that you could move #3 from one side of the lugs to the other on #1 which would then give you a total of 6 different measurements.
A service guy that is very very into his stuff may be able to advise you or you've got some experimenting to do.
I would be very curious as to what you try and your results - - - TIA. |