|
Eastern NC | Did you buy this from a dealer or second hand?
Reason I ask is you are going to need several other wiring harnesses to make it work with what you have.
I used a ATU harness (BPF12136) that plugged directly into the ATU, tied into the corner post harness 4 pin CAN connector for CAN, and had a power harness that hooked into the 3 pin convenience outlet that plugged into the ATU harness that powered up the ATU.
I didn't have to remove any covers other than to install the resume switch.
I believe the power harness was PF80873. This plugs into that 2 pin connector labeled greenstar power.
And I did put a terminator on the corner post harness connector but I don't think it was needed. PF80831
Im sure there are several different ways to do it, but that is how I did this one because the guy wanted to be able to easily move it, and this puts all the connections in plain sight and easy to get to.
It looks like you already have the BPF12136 so in theory the only connections you need are power into that harness and CAN connection which the easiest is form the corner post harness. | |
|
Help needed ATU300 plug location on 6150R ?
