|
| for farms is correct. On the S3 and STS you will need a clean USB stick and Field Notes on your computer to create a job summary. For the STX and MAX it gets a little confusing. First, if you are using an eDrive, eDriveTC, or eDriveX, you will do the job summary the same way as the S3 and STS. If you are using an eDriveXC or eDriveXD you can create a job summary that will print out as a PDF file directly from the USB stick. The REBEL will only do the PDF job summary. I will link the articles for the PDF versions from our Knowledge Base below. I will also place a link to the Software page of our Knowledge Base. Please click on the orange text next to "Field Notes" to download the software. It will be in the form of a zip file. It will go to your download file. Right click on "fieldnotes_5_4.zip" then click "Extract All". Once the file is open, scroll to "SETUP.EXE". Double click on it and you may be asked if you want this to continue, click yes. If you are using Windows 10 and are experiencing difficulties, please see the link for instructions on how to make this software work with Windows 10. It is important to know that the software required for Field Notes to work on Windows 10 is no longer supported by Microsoft and could pose a security risk to your computer. Use at your own risk.
Please call Outback Guidance Customer Support at 1-800-247-3808, M-F, 8 am-5 pm CST if you have any questions. Or follow this link to our Knowledge Base, https://outbackguidance.zendesk.com/hc/en-us for 24/7 self help troubleshooting.
STX using eDrive XD or XC- https://outbackguidance.zendesk.com/hc/en-us/articles/360039438473-H...
MAX and Rebel- https://outbackguidance.zendesk.com/hc/en-us/articles/360045571193-H...
Field Notes- https://outbackguidance.zendesk.com/hc/en-us/articles/360019398113-G...
How do I get Field Notes to work on Windows 10- https://outbackguidance.zendesk.com/hc/en-us/articles/360044301294 | |
|
Have out back , how do I get maps and records off monitor
