Posted 6/26/2020 19:28 (#8337949 - in reply to #8337280) Subject: RE: Lexion 585R and Ag Leader Integra YM
There has to be a vibration calibration done then header height calibration. The vibration calibration gets sort of errors out of the flow sensor when the machine is running full speed. Header height will tell the system when to turn logging on and off. If the vibration calibration hasn't been done, there is the possibility that it will not read flow until that is done.
Another item is the elevator speed. Is the display reading that while you are running? That should be between 250 and 600 rpms.