Northwest kansas | I just went through this here. I had to get the NMEA messages at the antenna. You are going to need a 12 pin DT series Deutsch connector, male and female, and a DTM series Deutsch connector, male for the 750. I hope the 750 is the same as an FMX
From JD to Trimble
1
2
3 – 3 (RS232 TXD) Green
4
5
6 – POWER (KEY)
7 – 5 GROUND Black
8
9
10 – 4 (RS232 RXD) Blue
11
12 – POWER (KEY)
Edited by justbad7 6/1/2020 21:14
|